ZTE Origin (Concord, V768)

ZTE Origin V768

  1. On the device, tap the Menu icon.
  2. Select Settings.
  3. Select Wireless & networks.
  4. Make sure Wi-Fi is Off (you can change this later).
  5. Tap on Mobile networks.
  6. Make sure Data Enabled is checked.
  7. Tap on Access Point Names.
  8. Press the Menu key and tap Reset to Default.
  9. Press the Menu key and tap New APN
  10. Select Name: enter solavei and tap OK.
  11. Select APN: enter solavei and tap OK.
  12. Enter the user name and password listed below. If no value is listed, leave the field blank.
    1. User name: <leave blank>
    2. Password: <leave blank>
  13. Select MMSC: enter http://solavei.mmsmvno.com/mms/wapenc and tap OK.
  14. Select MMS proxy: <leave blank>
  15. Select MMS port: <leave blank>
  16. Select MMS protocol: WAP 2.0
  17. MCC: 310
  18. MNC: 260
  19. Select : Authentication type: Not set
  20. Select APN type: default,mms (No spaces. Needs to match exactly)
    1. Alternate: default,mms,hipri,supl,admin,mobile
  21. APN enable/disable: APN enabled.
  22. Press the Menu key and select Save
  23. Press the radio button next to Solavei to set the profile as default.
  24. Delete all non-Solavei APN's after saving the Solavei APN.
  25. At this time, turn the phone Off and then back On again.
  26. Test the settings by sending a picture message to yourself.
  27. Tap the Menu icon.
  28. Tap Browser.
  29. Enter a non-Google web site to test.

Additional Assistance
: If you have followed the steps above and are having trouble setting up your phone try using our interactive Self Help Troubleshooting Guide. If you have further questions, you can ask one of our Solavei Experts in our online Support Community below. Simply type in your question and click the Ask button.