Samsung Galaxy S2

Samsung Galaxy S2

  1. On the device, tap the Menu icon.
  2. Select Settings.
  3. Select Wireless & networks.
  4. Make sure Wi-Fi is Off (you can change this later) and Mobile network is On.
  5. Tap on Mobile networks.
  6. Tap on Access Point Names.
  7. Press the Menu key and tap Reset to Default.
  8. Press the Menu key and tap New APN.
  9. Select Name, enter solavei and tap OK.
  10. Select APN, enter solavei and tap OK.
  11. Enter the user name and password listed below. If no value is listed, leave the field blank.
    • User name: <leave blank>
    • Password: <leave blank>
  12. Select MMSC, enter http://solavei.mmsmvno.com/mms/wapenc and tap OK.
  13. Select MMS proxy: <leave blank>
  14. Select MMS port: <leave blank>
  15. Select MMS protocol: WAP 2.0
  16. MCC: 310
  17. MNC: 260
  18. Select : Authentication type: Not set
  19. Select APN type: default+mms
  20. APN enable/disable: APN enabled.
  21. APN Protocol: IPv4
  22. Bearer: Unspecified
  23. Press the Menu key and select Save.
  24. Press the radio button next to Solavei to set the profile as default.
  25. Delete all non-Solavei APN's after saving the Solavei APN.
  26. At this time, turn the phone Off and then back On again.
  27. Test the settings by sending a picture message to yourself.
  28. Tap the Menu icon.
  29. Tap Browser.
  30. Enter a non-Google web site to test.


User Manuals:

T-Mobile_T989_Galaxy_S_II_Spanish_User_Manual_SW_Version_UVKK7

T-Mobile_T989_Galaxy_S_II_English_User_Manual_SW_Version_UVKK7


Additional Assistance
: If you have followed the steps above and are having trouble setting up your phone try using our interactive Self Help Troubleshooting Guide. If you have further questions, you can ask one of our Solavei Experts in our online Support Community below. Simply type in your question and click the Ask button.