Huawei Prism II

  1. On the device, tap the Menu icon.
  2. Select Settings > Wireless & networks > Mobile networks > Access Point Names.
  3. Press the Menu key and tap Reset to Default.
  4. Press the Menu key and tap New APN.
  5. Select Name, enter solavei and tap OK.
  6. Select APN, enter solavei and tap OK.
  7. Enter the user name and password listed below. If no value is listed, leave the field blank.
    • User name: <leave blank>
    • Password: <leave blank>
  8. Select MMSC, enter: and tap OK.
  9. Select MMS proxy: <leave blank>
  10. Select MMS port: <leave blank>
  11. Select MMS protocol: WAP 2.0
  12. MCC: 310
  13. MNC: 260
  14. Select Authentication type: Not set
  15. Select APN type: default,mms,hipri,supl,admin,mobile
  16. APN Protocol: IPv4
  17. APN enable/disable: APN enabled.
  18. Press the Menu key and select Save
  19. Press the radio button next to Solavei to set the profile as default.
  20. Delete all non-Solavei APN's after saving the Solavei APN.
  21. At this time, turn the phone Off and then back On again.
  22. Test the settings by sending a picture message to yourself.
  23. Tap the Menu icon.
  24. Tap Browser.
  25. Enter a non-Google web site to test.

Additional Assistance: If you have followed the steps above and are having trouble setting up your phone try using our interactive Self Help Troubleshooting Guide. If you have further questions, you can ask one of our Solavei Experts in our online Support Community below. Simply type in your question and click the Ask button.