BLU Studio 5.0 II (Dual SIM)




  1. Insert your Solavei SIM card in the SIM Slot 1 near the battery.
  2. When you boot up the phone, it will show a "Manage SIM screen". 
  3. Touch the T-Mobile selection that should be showing your phone number.
  4. Click on Edit SIM Name
  5. Type in: Solavei and touch OK
  6. Click Next
  7. Click Next on the Manage SIM screen
  8. Finish the other set up screens required for WiFi Setup, etc.
  9. Click on the Menu on the home screen
  10. On the device, tap the Menu icon.
  11. Select Settings 
  12. Select Wireless & networks
  13. Make sure Wi-Fi is Off (you can change this later) and Mobile network is On.
  14. Tap on Mobile network.
  15. Tap on Access Point Names.
  16. Press the Menu key and tap Reset to Default.
  17. Press the Menu key and tap New APN
  18. Select Name: enter solavei and tap OK.
  19. Select APN: enter solavei and tap OK.
  20. Enter the user name and password listed below. If no value is listed, leave the field blank.
    • User name: <leave blank>
    • Password: <leave blank>
  21. Select MMSC: enter http://solavei.mmsmvno.com/mms/wapenc and tap OK.
  22. Select MMS proxy: <leave blank>
  23. Select MMS port: <leave blank>
  24. MCC: 310
  25. MNC: 260
  26. Select Authentication type: Not set
  27. Select APN type: Put a check mark in default, mms, supl and wap and touch OK.
  28. APN enable/disable: APN enabled.
  29. Press the Menu key and select Save
  30. Press the radio button next to Solavei to set the profile as default.
  31. At this time, turn the phone Off and then back On again.
  32. Test the settings by sending a picture message to yourself.
  33. Tap the Menu icon.
  34. Tap Browser.
  35. Enter a non-Google web site to test.

Additional Assistance: If you have followed the steps above and are having trouble setting up your phone, try using our interactive Self Help Troubleshooting Guide. If you have further questions you can ask one of our Solavei Experts in our online Support Community below. Simply type in your question and click the Ask button.