Android Internet and MMS Setup

If you brought your unlocked phone to Solavei (BYOP), you will need to change the Internet and Multimedia Messaging Service (MMS) settings in your phone. These settings are called APN (Access Point Name) settings. Changing the APN settings will setup your phone to find and use the Solavei network.

Step 1 - Attempt Automated Setup

Our Solavei Phone Settings has the ability to send settings to your device Over The Air (OTA). We recommend you attempt to setup your phone with this before trying manual data setup.

Please follow the below steps:

  1. Enter your IMEI (*#06# from your dial pad) or search for your phone in the Solavei Phone Settings and select it.
  2. Depending on the compatibility of your device you will either be asked to enter your phone number, or follow some manual instructions, if the latter then you can use Step 2 below as a reference.
  3. Once you've entered your phone number and completed the Captcha box (number confirmation), click Confirm.
  4. From there wait for the configuration message to appear on your phone.
  5. Once you've received it follow the prompts to install the settings, you may be asked to install multiple times, but not more than two.
  6. The password is always 1234


Note: It can take up to 5 minutes for the OTA configuration message to get to your phone. If you do not receive the OTA message, please attempt the manual setup steps located below.

If you are still unable to access data and/or MMS after the installation, please try the below generic Android data settings.


Step 2 - Generic Android Internet and MMS Settings

If you are unable to find the OTA for your particular Android phone. Below are some generic settings that may work for you. If you don't have a specific field, just leave as default and move to the next step.

  1. On the device, tap the Menu icon.
  2. Select Settings.
  3. Select Wireless & networks.
  4. Make sure Wi-Fi is Off (you can change this later) and Mobile network is On (or checked).
  5. Tap on Mobile network.
  6. Tap on Access Point Names.
  7. Press the Menu key and tap Reset to Default.
  8. Press the Menu key and tap New APN
  9. Select Name: enter solavei and tap OK.
  10. Select APN: enter solavei and tap OK.
  11. Enter the user name and password listed below. If no value is listed, leave the field blank.
    • User name: <leave blank>
    • Password: <leave blank>
  12. Select MMSC: enter and tap OK.
  13. Select MMS proxy: <leave blank>
  14. Select MMS port: <leave blank>
  15. Select MMS protocol: WAP 2.0
  16. MCC: 310
  17. MNC: 260
  18. Select : Authentication type: Not set
  19. Select APN type: default,mms (No spaces. Needs to match exactly)
    • Alternate: default,mms,hipri,supl,admin,mobile
  20. APN Protocol: IPv4 or IPv4/IPv6
  21. APN Roaming Protocol: IPv4
  22. APN enable/disable: APN enabled.
  23. MVNO Type: IMSI
  24. MVNO Value: 310260x
  25. Press the Menu key and select Save
  26. Press the radio button next to Solavei to set the profile as default.
  27. Delete all non-Solavei APN's after saving the Solavei APN.
  28. At this time, turn the phone Off and then back On again.
  29. Test the settings by sending a picture message to yourself.
  30. Tap the Menu icon.
  31. Tap Browser.
  32. Enter a non-Google web site to test.


Step 3 - APN Settings Using an App

If steps 1 and 2 above did not work, we recommend downloading an app from the Google Play store which may help with any issues preventing your manual APN settings from working. There are several APN setting apps in the Google Play store.

Additional Assistance: If you have followed the steps above and are having trouble setting up your phone, try using our interactive Self Help Troubleshooting Guide. If you have further questions you can ask one of our Solavei Experts in our online Support Community below. Simply type in your question and click the Ask button.